Moldy: This problem occurs in the damp paint surface, such as water vapor condensation in the glass and metal surface often produce brownish black stains. At this point can be used fungicide, according to the instruction instructions to deal with moldy parts, to be killed after the mold, the surface clean, and then re-paint. Stains: There are many reasons for the stains on the paint surface.
how to build a bench seat with back restFor example: the moisture in the latex paint dissolves the material on the wall and rust out of the paint, worn with steel wool velvet wall will produce rust. Wall within the dark tube leakage and other stains. To prevent stains, can brush a layer of aluminum powder primer, if there have been stains, you can remove the stain at the latex paint, brush layer with aluminum powder primer, and then re-paint.
white elegant fencesLoss of luster: the reason is not on the primer, or primer and the inner paint is dry on the direct light paint, the results of light paint is absorbed by the wood and lose luster. Glossy paint is also a reason. With dry and wet sandpaper to wear the old paint, brush to polish the dust, with a clean damp cloth to wipe the surface, to be dry through, and then re-brush the top paint.
cost of diy teak flooring in boatsIt is important to note that in the low temperature environment painted, paint dry, it may lose luster. The film is wrinkled: usually due to the first paint is dry or brush the second paint caused by the paint. At this time the solvent in the lower paint will affect the upper film, wrinkle it. In this case, the wrinkled paint film may be removed by chemical mercury removal or heating, and the paint may be re-painted. Remember, be sure to wait for the first time after the paint can be on the second time.
best carbon crystal wooden floor