Everyone in the use of
raymond mill, certainly know to maintain the grinding ring, roller, blade, and these materials directly contact with the wearing parts, usually ignore other factors, the use of mill friends know, the voltage The use of equipment is also affected, then the mine work when the voltage instability will be how? What's wrong? Let's take a look at it.
What happens when it works when the voltage is unstable? What's wrong?
When we use Raymond Mill, the voltage suddenly affects the production and is very easy to burn the motor! This point we must pay attention, do not ignore the impact of voltage on the equipment.
First, it is mainly at work with a constant voltage to drive the roller to continue to rotate, and repeatedly squeeze the grinding ring to grind the material, the final powder out of the material will be evenly finely, if the voltage Suddenly large and small, will affect the finished product size, resulting in rework phenomenon;
Second, the voltage instability, will lead to blower wind pressure when large and small, resulting in grinding chamber pressure instability, the voltage becomes smaller when the mill pressure will become smaller, in which case the grinding material will not be easy to send To the analysis machine, resulting in a large number of grinding room accumulation of materials, causing ventilation pipe blockage;
What conditions will lead to
raymond mill voltage instability
First, the power cord contact bad (transformers, wattens, circuit breakers, sockets and other parts of the joints);
Second, the output power is unstable, resulting in voltage instability;
Third, the power supply zero line resistance is too large, poor contact;
Fourth, the equipment itself: mechanical part of the transport is not flexible, there are plugs caused by functional instability, causing current changes, voltage instability;
What happens when the voltage is unstable when the Raymond Mill is working? What's wrong? Now we all know it, if you encounter voltage instability, be sure to carefully check the line is the reason for the equipment or equipment to find out the reasons for the deal. In addition, we can also use some regulators to regulate the voltage to ensure safe and safe production of voltage.