Stone slag, a building material, carbide slag first with water to remove the silicon block, after the settlement of the upper layer of water, the lower layer of water content of about 66 ~ 70%. The coal, loess, iron slag according to the weight ratio of 16: 16: 5 into the mud mill, grinding, continuous water made of water 54 to 98% of the mud. And then the carbide slag and mud evenly mixed with calcium oxide 48 ± 1% of the slurry, dehydrated and dried after crushing, and then formed into a certain size of the ball, into the shaft kiln, after calcination, crushed, ground into cement. Second can also be used to make bricks, mortar, etc., which can be achieved through the
Gold Ore Crusher.
Mine crusher type jaw, cone, impact, counterattack, hammer and so on. Some of the equipment output of the slag flake more, can not meet the requirements, and hammer only close to the sieve size of the gravel meet the requirements, small size is still to sheet for more large, medium-sized mines do not use. In the above equipment, the impact crusher produced by the slag actually meet the requirements, but because of its stone powder accounted for a larger proportion of all products, resulting in waste of resources. Therefore, need to go through some improvement before they can put into production. (Granite, limestone, concrete, etc.), widely used in hydropower, highways, artificial, and so on. It can be used for all kinds of coarse, medium and fine materials such as granules, granite, limestone and concrete with particle size of not more than 120-500 mm and compressive strength of not more than 320 MPa. Gravel material, broken and other industries. The series of counter-crushing structure is unique, equipped with high chrome plate hammer, unique counter-liner; suitable for hard rock broken, efficient energy saving; nesting particle size adjustable, can simplify the crushing process, and has a large crushing ratio, Product shape was cube, can be selectively broken and so on.