The
Portable crusher plant needs to be checked regularly. This is what we must do to eliminate the malfunctions generated by the machine, and to find out if the internal parts of the equipment are damaged in time and then solve it in time. What are the points of this series of processing? ? We do not have a simple understanding together and we hope to be helpful to your future operations.
1. The connecting parts of the motor, reducer, hydraulic coupling, nose, tail, etc. must be complete, intact and fastened. Reducer, hydraulic shaft section should be no oil leakage, oil leakage, the amount of oil should be appropriate.
2. The signal of the mobile crusher must be sensitive and reliable, no signal is not allowed to turn on, and the spray sprinkling device must be kept intact.
3, power cables, operating lines must be neat, without being squeezed.
4. The debris near the head of the mobile crusher and the motor and reducer dust must be cleaned and cleaned.
5, it's work surface scraper conveyor head and the back of the transfer machine lap to be appropriate.
6, scraper chain plate is very important, scraper and screws must be complete fastening.
7, the transfer machine trolley must be stable and reliable.
8. In the case of power transmission of the bridge body, there should be no abnormal sound in the operation of the parts, and the scraper, chain, and connecting ring should be free from twisting, twisting, bending and deformation.
9. The roadway support at the mobile crusher must be intact and firm.
10. Its safety nets and protection devices must be guaranteed to be free from deformation, failure, and safety.
The above are the basic points for the detection and handling of mobile crushers. We hope that they can play a certain role in the use of everyone in the future, so specific needs also pay special attention to everyone.