1, dust reduction measures - at the source
In general, the dust reduction plan should be based on prevention. By optimizing the design and sealing of the entire mobile crushing production line, dust generation can be reduced, thereby reducing the spread of dust from the source. For example, the material to be conveyed can reduce the drop of the material as much as possible and strengthen the airtight measures. This method can reduce the amount of dust that may follow the mobile crushing station and reduce the dust load in the follow-up work. In addition, it can also be equipped with a dust removal device or a sealed cover (
construction waste crusher) to reduce dust pollution from the source.
2. Dust-reduction measures - in operation
In the mobile crushing station operation, dust reduction can also be achieved through some small operations. For example, a suitable amount of water can be added to the material to be broken, which can greatly reduce the dust generated during the operation of the mobile crushing plant. In addition, for a windy operation environment, it is recommended that a dust removal humidifier be installed to handle the loading and unloading of materials. Turning transport and materials in the open air yard, etc. to consider the spray water humidification, in order to reduce dust, which can effectively curb the dust in windy weather problems, making the mobile crushing plant operations can also reduce dust production.
3, dust removal measures - after work
After the material is crushed in the
construction waste crusher, the tail work also needs to be dust-removed. Here, it is recommended to use high-efficiency bag filter or cyclone dust collector to collect the dust. The implementation of this measure can generally reduce dust particles. , Emissions not more than 40mg/NM3, to meet national standards, and then to stay away from the haze weather to make a contribution.
4, other time
In order to better reduce the amount of stone powder in the operation of mobile crushing station equipment, it is possible to inspect the components of the equipment on a regular basis, such as the inspection of the liner, the sealing of the machine housing, and the looseness of the screws at the joints of the various devices, and the mobile crusher. Stations are regularly maintained and repaired, which not only greatly reduces the amount of dust, but also improves work efficiency.