When we supply the
Quarry crusher to the customer, we will spray the words on the fuselage on the fuselage. This is because the crusher is required to be filled with grease in the process of high-speed operation of the crusher. Fever problem. Therefore, when buying mine crushing equipment, you must ask the bearing model to choose the butter.
Under what circumstances need to be lubricated with butter
Under normal circumstances, the condition of adding butter is that the bearing is heated or the bearing is difficult to rotate, and the grease is added. For machines, components and bearings that work under high temperature conditions, the lubricating oil with higher ignition point should be selected. The ignition point of the oil should be 40 & mdash higher than the temperature of the lubricated surface; 50 degrees Celsius. Under the conditions of low temperature in winter, when the mine crushing equipment is working in the open air, the viscosity of the lubricating oil should be selected to the smallest. Because the oil quickly condenses when the temperature is lowered, it hardens hard, and the moving part of the machine generates a large resistance. In order to solve this problem, it is common to use a condensation temperature this week to smell a low air temperature of 5 & mdash; 10 degrees Celsius. In the absence of such lubricating oil, the thicker lubricating oil can be turned into a leaner lubricating oil by adding various additives or infiltrating diesel oil and solar oil. The amount of oil to be infiltrated is determined according to the actual situation. The type of wear or replacement of oil should take into account the degree of wear of the parts.
This shows that it is necessary to choose the right butter to lubricate
Crusher, but we still recommend that you need to store the lubricant after returning to the site after purchasing the equipment, so that you can add butter to the equipment in an emergency. Avoid situations where production stops in the middle.