=12px[color=#000000]In the daily production of the
Ore Milling Equipment, since the working objects are all hard materials of ore type, it is inevitable that the wearing parts are worn. However, if it is protected during use, or if it is found that the wearing parts are worn out and replaced immediately, the grinding machine will work normally and will not delay the work efficiency. What should I do if the wearing parts of the grinding machine are worn out?[/color]=12px[color=#000000]First of all, the main reason is whether the grinding machine can be strictly operated, and the daily maintenance and maintenance will reduce the wear of the parts, extend the life cycle of the grinding machine, and improve the utilization rate of the grinding machine. Work efficiency and economic efficiency will be raised. The hardness of the material and the impurities in the material will cause the grinding machine to wear to a certain extent. If the hardness of the material processed by the grinding machine is relatively large, even if the grinding machine is made of steel, it will aggravate the wear speed of the
Grinding Mill, resulting in the early scrapping of some parts, which is not worth the loss; The abrasive impurities are mixed into it, and it is impossible to break it and destroy it so that the continuous recirculation in the grinding chamber will accelerate the wear rate of the abrasive parts. Therefore, the user must strictly refer to the copy in the process of use, and carry out accurate manipulation.[/color]=12px[color=#000000]The service life of the grinding machine is also closely related to the wear of the wearing parts, so daily maintenance is necessary, not only can extend the service life of the grinding machine, but also ensure the working efficiency.[/color]