Conical
Raymond Mill has the following advantages compared with the traditional Raymond machine: 1. Long service life, the roller of the conical mill can be used for 1 to 2 years, the wear is very small, mainly after the roller roll, and Slow speed is related. The Raymond machine grinding roller is relatively small, and the rotation speed is faster than that of the cone mill, so the wear rate is also large. 2. The production capacity is huge and the energy consumption is very low. Take the smallest M5055 cone mill and M4528 high-pressure mill to compare (the relatively large of the Raymond machine series), under the premise of processing 100-mesh coarse powder, the output of M5055 can reach 20-30 tons per hour. The motor power is 110kw, while the M4528 high-pressure mill has a capacity of no more than 15 tons and a main power of 132kw. In this comparison, it is known that the conical mill is a professional coarse grinding machine with large output and low energy consumption. 3. Conical Raymond machine feed port is slightly larger, you can enter a larger material. The maximum feed of the M8085 cone mill is less than 50mm, while the Raymond mill needs less than 35mm. 4. Conical Raymond machine can pre-grind hard-to-grind materials such as slag and pyrite, and the effect is better than that of high-pressure mill. Conical Raymond machines have many advantages, but they are always in the coarse powder field. The conical Raymond machine does not have a powder selection system, so it is often used to produce coarse powder. It is difficult to process more than 150 mesh powder. This weakness of the Conical Raymond machine also makes it a rough powder expert. Although the cone-shaped
graphite mill can only produce coarse powder, it has great effect on the optimization of the process in some fields, especially in the environmental protection and waste disposal such as slag pre-grinding, pyrite treatment and desulfurization lime powder. The tapered Raymond machine is a highly efficient coarse powder mill that is always environmentally friendly. Conical Raymond machine is a high-efficiency mill equipment suitable for the coarse powder field developed by ZENITH Mining Equipment Co., Ltd. by drawing on foreign advanced technology. The Conical Raymond machine is the representative of our new mill, which is a microcosm of our company's continuous innovation. The conical Raymond machine is a relatively tall mill with a tapered outer shape, the material enters from the upper end, the lower end is ground, and the transmission system is also at the upper end.