=12px[color=#000000]With the improvement of people's material level, it is necessary for people with car owners to clean and maintain the car at regular intervals, which can stabilize the performance of the car and keep the car as new. Like the car, the
Stone Crushing Plant needs daily maintenance, which is indispensable. For new users, I do not know how to maintain the equipment, resulting in equipment failure. Let's take a look at the five-point maintenance work on the stone crusher.[/color]=12px[color=#000000]1. For the new stone crusher, after the problem occurs, it is necessary to closely cooperate with the maintenance, clean the main contents, strengthen, adjust and replace the new oil quality, and after the completion of the work, it is necessary to be inspected and supervised by the management department personnel.[/color]=12px[color=#000000]2, stone crusher for seasonal maintenance, mainly used to replace oil, fuel, antifreeze, such measures to increase the freezing facilities. There are departmental ancestors, operational supervision, inspection and supervision.[/color]=12px[color=#000000]3. Maintenance of the main equipment of the stone crusher. Before each day of operation, check the wear and integrity of the main components, especially the main components, such as the guards and rafts of the equipment, and other corresponding components. maintenance work.[/color]=12px[color=#000000]4. Some main parts and equipment of the
stone production line must be maintained to ensure the operation of the whole equipment. For example, conveying equipment, it is necessary to check the tightness of the conveyor belt frequently to ensure production efficiency.[/color]=12px[color=#000000]5. For the lubrication work of the stone crusher, it is necessary to pay attention to the grease as 50% of the volume, which must be replaced every three months to achieve good lubrication. The temperature of the stone crusher grease should be noted. In the use of the thin oil system, pay attention to its return oil temperature, the temperature value should not exceed 60 degrees.[/color]