For mining machinery, there are certain wears in the processing of various ores, and these wears will cause their failures, such as the phenomenon of rocking when the river pebble sanding machine is working, here It is to introduce the reasons for the three aspects of this phenomenon.
The first reason is that one of the important parts of the river pebble
sand making machine is the impeller. If there is obstruction in the impeller flow path, the feeding will be uneven and the body will swing too much. The solution at this time is to put the impeller on the flow path. Obstruction
The second reason is that if the river pebble sand making machine is used, the phenomenon that the feed particle size is too large will cause the swinging condition to occur. Of course, the feed particle size should not be too small or the crushing is insufficient. Production requirements, which is why the river pebble sand making machine is very strict with the feed particle size requirements;
The third reason is that when the river pebble
sand making machine is used, the wear phenomenon of internal parts is inevitable. One of them is the wear phenomenon of the wearing parts on the impeller. If the wear is serious, it will cause the unstable operation of the equipment to sway. This time The solution is to replace the worn consumables so that the operation of the equipment reaches equilibrium;
This paper mainly introduces the three causes caused by the rocking phenomenon of the river pebble sand making machine. The above is a detailed introduction to these reasons, and the solution is given. Only by solving the phenomenon of the machine swinging, the production can be made. Smooth progress.