Talcum powder is often used in the chemical
Quartz Crushing Machine India industry. Common applications, such as rubber, plastic, paint, and other chemical industries, can be used as reinforcing modifiers. The use of talc in the chemical industry is mainly to increase the stability of the product shape; for example, increase the tensile strength, shear strength, flexural strength, pressure strength, reduce deformation, elongation, thermal expansion coefficient, high whiteness, Particle size is uniform and strong. Where can I find talc milling equipment?
Of course, talc is often used in our lives, such as the
Heavy Hammer Crusher Installation and Use rust on clever irons. Dip a bit of ammonia with wool to remove the rust. If there are traces of rust, you can use special talcum powder and a few drops of edible oil to make a paste, and use it to completely remove the rust. R & D products require talents, and high-quality front-line production personnel are also needed to produce high-quality products. In recent years, we have continuously strengthened employee training to improve the skills and quality of employees. This has laid a good foundation for the production of high-quality products. The important thing is that the products need market verification. We have an ultra-fine grinder to process the material talc, and the equipment can be arbitrarily adjusted between 300-3000 mesh, and is also equipped with a dust collector, which greatly reduces the phenomenon of dust overflow, and at the same time, special selection of spare parts To increase wear life.
Talc generally needs to be processed into different fineness by talc milling machine before it can be further applied. With the continuous expansion of talc application, the production and sales of talc milling machine are also increasing. Our pulverizer for various materials such as talc can accept non-flammable and explosive materials below 20mm and Mohs hardness below 6. Due to the major changes of the grinding roller and the grinding roller assembly of the main machine, the material must be ground several times from top to bottom. The centrifugal force of the grinding roller is fully used, and the contact area with the grinding ring is large, so it can produce fineness High powder, the fineness of the finished product is mainly distributed between 5-45 microns.