Stainless steel wire break occurs when the situation has occurred, then what is the cause of it? The impact of the use of the process under the impact of severe impact will cause the impact of stainless steel wire load, once the cumulative value exceeds the allowable range of work stress will be pulled off the problem. The service life of stainless steel wire will be shortened accordingly. Wire, lubrication is not enough, etc. also may pull off the stainless steel wire, affecting the performance of its play. How to fundamentally reduce the broken wire of stainless steel wire.
galvanized corrugated steel sheet with price Stainless steel wire drawing process will be part of the particle off the card in the mold compression zone lead to disconnection, for this problem must be replaced periodically lubricant to reduce the break rate.
904L stainless steel rod bar manufacturer Winding round of winding or threading problems can also cause disconnection, so in the control of the basis of the initial tension in the fixed speed wheel on the more around a few lines, carefully around, can not appear folder situation. Mold on the machine using the incorrect size will cause the ratio of normal compression ratio confusion and thus cause disconnection problems, in addition to improving the internal structure of the mold to improve the accuracy of the mold itself is to reduce the rate of stainless steel wire breakage key.
S235JR steel sheet galvanized steel sheet